Automatic loading panel saw EBTR 120 TWIN PUSHER - C3085
Technical characteristics
Description :
SELCO panel saw
TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm
Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table
Principal technical characteristics
Max cutting length : 5600 mm
Max auxiliar pusher course : 4300 mm
Max blade height from table level : 122 mm
Max clamps opening : 110 mm
Lifting table with direct loading : 5600 x 2200 mm
Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm
Main blade motor 18,5 kW / 50Hz (25 Hp)
Incisor blade motor 2,2 kW / 50 Hz (3 Hp)
Brushless motor for blade chariot - Speed 1 -150 m/min
Brushless motor for main pusher – Max speed 100 m/min
2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm)
Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER
Main blade Ø 430 mm
Incisor blade Ø 200 mm
4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line)
4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line)
4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line)
Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands
4 air cushion tables
4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation
Lifting loading table
Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher
The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible
The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option).
Automatic cut panels evacuation
Heavy single structure, Industrial chassis, strong stability
Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade
Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés
Pressor group
Lateral alignment group with 2 independent rollers
The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices
When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation
PC Windows XP, 17" screen
With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings
Software and applicancies:
"OPTIPLANNING" Pro Version software :
Great number of cutting lists (including different types of material) allowing “all at once” optimization
"IMPORT FILE" function
Editing on external device and import files on machine PC. Automatic management of panel piles and waste material
Panel stock and scrap debris function
"QUICK OPTI" software
Cutting schematics optimization
Electronic label printer with PEELING option
Complementary equipment:
"QUICK CHANGE" device
For rapid and secure replacement of the main blade and the incisor blade
"DIGISET" function
For the electronic vertical and horizontal alignment of the incisor blade with the main blade (directly on PC command)
SECOND rubber roller
For lateral alignment device
ADDITIONL PNEUMATICAL CLAMP for vertical 90° displacement
5th ADDITIONAL CLAMP for auxiliary pusher positioned at 810 mm from the squaring line
START CYCLE PUSHER distance command including the emergency pusher. Positioned near the second air cushion
"P.FS." Function for transversal cutting (POST-FORMING)
ADVANCED WORKING STATION
"Macro" function : groove making inside a program
MOTORIZED CONVEYOR at lifting table entry RIGHT LATERAL LOADING on lifting table MOTORIZED ROLLERS ON LIFTING TABLE
Dust extraction :
1 principal opening 200 mm
2 above openings on the cutting line 100 mm
1 above opening at the extremity of the pressor 150 mm Needed suction debit 7000 m3/h
Pneumatical infeed : 260 L/min; 8 bars
INVERTER ON LIFTING TABLE for rapid descent
Power and Motors
Voltage: 380 V
Pluging: Three-phased
Power: 33 Kw
Overall dimensions